Fabric 2.0 install guide(安装指引)

  • 血白
  • 更新于 2020-05-18 19:20
  • 阅读 3878

你需要docker, docker-compose,go,git 以及 强悍的网络, 然后你就可以体验官方一键搞定的网络(链环境)和链码(智能合约), 并用官方为你写好的sdk和调用sdk的demo代码体验与链码交互

基本环境准备

  • Docker
  • docker-compose
  • docker 阿里镜像加速
  • Git

对于 Mac

上诉环境只需要下载 docker的 dmg 安装后即可拥有 docker 和 docker-compose

对于 CentOs

docker
sudo yum update
# 移除旧版本
yum remove docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-selinux docker-engine-selinux docker-engine
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
sudo yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

#安装 docker
sudo yum install docker-ce
sudo systemctl start docker
# 开机启动
sudo systemctl enable docker
# 验证
docker --version
docker-compose
curl -L "https://github.com/docker/compose/releases/download/1.22.0/docker-compose-(uname−s)−(uname -m)" -o /usr/local/bin/docker-compose
chmod +x /usr/local/bin/docker-compose
docker-compose --version
git
sudo yum install -y git
go
wget -c https://studygolang.com/dl/golang/go1.14.linux-amd64.tar.gz
tar -C /usr/local/ -zxvf go1.14.linux-amd64.tar.gz
vi /etc/profile
# 新增
export PATH=$PATH:/usr/local/go/bin
export GOROOT=/usr/local/go
export GOPATH=/root/go/

source /etc/profile
#验证 
go version

下载文件及 docker 镜像

一键脚本

curl -sSL https://bit.ly/2ysbOFE | bash -s -- 2.0.0 1.4.4 0.4.18
  • 2.0.0:表示Hyperledger Fabric的版本号
  • 1.4.4:表示Fabric CA的版本号
  • 0.4.18:表示第三方引用的版本号

加速技巧

首先自己整个科学上网, 设置好 http 代理端口(如 1087)

然后在docker 偏好设置中设置代理, 如下图

image-20200310095814860

设置完成后点击 Apply & Restart 重启生效.

若没有科学上网, 则可以手动执行 docker pull 命令, 单个执行不容易卡住

docker pull hyperledger/fabric-peer:2.0.0
docker pull hyperledger/fabric-orderer:2.0.0
docker pull hyperledger/fabric-ccenv:2.0.0
docker pull hyperledger/fabric-tools:2.0.0
docker pull hyperledger/fabric-nodeenv:2.0.0
docker pull hyperledger/fabric-baseos:2.0.0
docker pull hyperledger/fabric-javaenv:2.0.0
docker pull hyperledger/fabric-ca:1.4.4
docker pull hyperledger/fabric-zookeeper:0.4.18
docker pull hyperledger/fabric-kafka:0.4.18
docker pull hyperledger/fabric-couchdb:0.4.18

最后检查

cd fabric-samples/bin
ls -l
export PATH=$PATH:$(pwd)
orderer version

1.存在 bin 目录

2.bin 下存在 orderer 等可执行文件

3.将 bin 添加到 PATH 下

4.检查 orderer 版本是否正确

测试网络

cd fabric-samples/test-network
#注意会删除全部容器
docker stop $(docker ps -q) 
docker rm $(docker ps -aq)
./network.sh up

1.进入测试网络目录

2.停止并删除之前的容器防止命名冲突

3.运行测试网络(通过 docker-compose)

链码入门示例(智能合约)

启动环境及安装 npm

cd fabric-samples/fabcar
#将启动 first-network 环境, 然后将早已存在镜像中的链码代码打包, 安装, 验证, 提交, 使其可执行
./startFabric.sh javascript
cd javascript
# 自行安装cnpm
cnpm i

测试链码

官方提示

JavaScript:

  Start by changing into the "javascript" directory:
    cd javascript

  Next, install all required packages:
    npm install

  Then run the following applications to enroll the admin user, and register a new user
  called user1 which will be used by the other applications to interact with the deployed
  FabCar contract:
    node enrollAdmin
    node registerUser

  You can run the invoke application as follows. By default, the invoke application will
  create a new car, but you can update the application to submit other transactions:
    node invoke

  You can run the query application as follows. By default, the query application will
  return all cars, but you can update the application to evaluate other transactions:
    node query

通过SDK(js) 调用合约

#添加 admin 用户和普通用户 user1
node enrollAdmin.js
node registerUser.js
# 执行合约的 queryAll 方法
node query.js
# 执行合约的 createCar 方法
node invoke.js
# 重新查询
node query.js

实际合约(js 代码)

fabric-samples/chaincode/fabcar/javascript/lib/fabcar.js

/*
 * SPDX-License-Identifier: Apache-2.0
 */

'use strict';

const { Contract } = require('fabric-contract-api');

class FabCar extends Contract {

    async initLedger(ctx) {
        console.info('============= START : Initialize Ledger ===========');
        const cars = [
            {
                color: 'blue',
                make: 'Toyota',
                model: 'Prius',
                owner: 'Tomoko',
            },
            {
                color: 'red',
                make: 'Ford',
                model: 'Mustang',
                owner: 'Brad',
            },
            {
                color: 'green',
                make: 'Hyundai',
                model: 'Tucson',
                owner: 'Jin Soo',
            },
            {
                color: 'yellow',
                make: 'Volkswagen',
                model: 'Passat',
                owner: 'Max',
            },
            {
                color: 'black',
                make: 'Tesla',
                model: 'S',
                owner: 'Adriana',
            },
            {
                color: 'purple',
                make: 'Peugeot',
                model: '205',
                owner: 'Michel',
            },
            {
                color: 'white',
                make: 'Chery',
                model: 'S22L',
                owner: 'Aarav',
            },
            {
                color: 'violet',
                make: 'Fiat',
                model: 'Punto',
                owner: 'Pari',
            },
            {
                color: 'indigo',
                make: 'Tata',
                model: 'Nano',
                owner: 'Valeria',
            },
            {
                color: 'brown',
                make: 'Holden',
                model: 'Barina',
                owner: 'Shotaro',
            },
        ];

        for (let i = 0; i < cars.length; i++) {
            cars[i].docType = 'car';
            await ctx.stub.putState('CAR' + i, Buffer.from(JSON.stringify(cars[i])));
            console.info('Added <--> ', cars[i]);
        }
        console.info('============= END : Initialize Ledger ===========');
    }

    async queryCar(ctx, carNumber) {
        const carAsBytes = await ctx.stub.getState(carNumber); // get the car from chaincode state
        if (!carAsBytes || carAsBytes.length === 0) {
            throw new Error(`${carNumber} does not exist`);
        }
        console.log(carAsBytes.toString());
        return carAsBytes.toString();
    }

    async createCar(ctx, carNumber, make, model, color, owner) {
        console.info('============= START : Create Car ===========');

        const car = {
            color,
            docType: 'car',
            make,
            model,
            owner,
        };

        await ctx.stub.putState(carNumber, Buffer.from(JSON.stringify(car)));
        console.info('============= END : Create Car ===========');
    }

    async queryAllCars(ctx) {
        const startKey = 'CAR0';
        const endKey = 'CAR999';
        const allResults = [];
        for await (const {key, value} of ctx.stub.getStateByRange(startKey, endKey)) {
            const strValue = Buffer.from(value).toString('utf8');
            let record;
            try {
                record = JSON.parse(strValue);
            } catch (err) {
                console.log(err);
                record = strValue;
            }
            allResults.push({ Key: key, Record: record });
        }
        console.info(allResults);
        return JSON.stringify(allResults);
    }

    async changeCarOwner(ctx, carNumber, newOwner) {
        console.info('============= START : changeCarOwner ===========');

        const carAsBytes = await ctx.stub.getState(carNumber); // get the car from chaincode state
        if (!carAsBytes || carAsBytes.length === 0) {
            throw new Error(`${carNumber} does not exist`);
        }
        const car = JSON.parse(carAsBytes.toString());
        car.owner = newOwner;

        await ctx.stub.putState(carNumber, Buffer.from(JSON.stringify(car)));
        console.info('============= END : changeCarOwner ===========');
    }

}

module.exports = FabCar;
点赞 3
收藏 1
分享
本文参与登链社区写作激励计划 ,好文好收益,欢迎正在阅读的你也加入。

0 条评论

请先 登录 后评论
血白
血白
江湖只有他的大名,没有他的介绍。